Torchies new project
- This topic has 960 replies, 23 voices, and was last updated 1 year, 10 months ago by Rik Hoving.
-
AuthorPosts
-
September 1, 2021 at 17:31 #71583Ian GibbonsParticipant
It always seems to be something doesn’t it. It’s amazing any of these projects get done. 🙂
- This reply was modified 2 years, 7 months ago by Ian Gibbons.
September 1, 2021 at 21:25 #71586Mild MitchParticipantNice Save Torchie!
September 1, 2021 at 23:05 #71587TorchieParticipantIt always seems to be something doesn’t it. It’s amazing any of these projects get done.
The joys of old cars Ian.
Nice Save Torchie!
Thanks Mitch. I hope it was a save and didn’t just open up another can of worms. TBD.
Torchie
- This reply was modified 2 years, 7 months ago by Torchie.
September 1, 2021 at 23:06 #71589TorchieParticipantIt always seems to be something doesn’t it. It’s amazing any of these projects get done.
The joy of old cars, Ian.
Torchie
September 4, 2021 at 22:17 #71608TorchieParticipantWhie waiting for some help today I did some glamorous work on the PS door.
Folded over the bottom edge.
With my friend inside the car and me out we did some serious tweaking.
Even after the stretch the PS door was a struggle to shut and latch. The window frame was pushing up against the inside of the door jam.
The front lower corner will need a relief cut.
Once I took off part of the top the door worked much better. I planned on cleaning this part of the chop up as the first time I did it was quick and dirty.
The body now sits square on the frame and all measurements are within a 1/8 of an inch from side to side.
That’s my idea of a good fit.
I also made up a temporary radiator support (It’s what hold up the front of the fenders.) so now when I lean on the front fenders, nothing moves.
Torchie
Attachments:
You must be logged in to view attached files.September 5, 2021 at 01:58 #71616TonyParticipantRear 3/4 shot looks good. nice to see from a different angle.
September 7, 2021 at 20:57 #71634TorchieParticipantRear 3/4 shot looks good. nice to see from a different angle.
Thanks Tony.
More dull stuff.
I’ve got 3 0f the 4 main Body mounts/ channeled floor sub frame pieces in. They all look about the same as this one.lol
Heavy wall 1×2″ stock. Last one is gong to attache to the inner cowl so I will have to make a bend to clear the trans.
Torchie
Attachments:
You must be logged in to view attached files.September 16, 2021 at 00:50 #71780TorchieParticipantStill working on the dull stuff.
No way to bend this heavy wall stock so it’s relief cuts to the rescue.
I also fab’d up a removable trans mont.
Torchie
Attachments:
You must be logged in to view attached files.September 19, 2021 at 22:01 #71811TorchieParticipantMade the second trans tunnel arch.
Set up the framing for the main cabin floor.
Side rails are tied into the door sills. this is very solid.
My first time ever sitting behind the wheel of this car.
Ill leave it to Tony and Quentin to make the “Vroom. Vroom” noises.
Torchie
Attachments:
You must be logged in to view attached files.September 19, 2021 at 22:49 #71818TonyParticipantVroom vroom!
September 20, 2021 at 00:03 #71819TorchieParticipantSeptember 20, 2021 at 01:28 #71820Larry PointerParticipantAha! Always wondered what became of the Cheshire Cat from Alice’s Wonderland: still grinning in Wonderland!
September 20, 2021 at 09:28 #71823Rik HovingKeymasterOh yeah…
MAJOR MILESTONE
Enjoy the beauty of Customizing
September 21, 2021 at 16:57 #71851Mild MitchParticipantHahahaha, Good Stuff Torchie!
September 22, 2021 at 02:37 #71856 -
AuthorPosts
- You must be logged in to reply to this topic.